Porsche Cayenne Turbo S (9PA) V84.8L Turbo Technical Service Bulletin # 952/09
Porsche PCM 3.0(R) New Map Data Information
Service
9
52/09 ENU 9110
Jan 12, 2010
PCM 3.0 With Navigation: New Map Data Record (52/09)
Model year: as of 2009
Vehicle Type:
Cayenne/Cayenne S/Cayenne GTS/Cayenne Turbo
Equipment:
Porsche Communication Management 3.0 with navigation (PCM 3.0)
Ino. 7T1 (Navigation)
Ino. 7QT, 7QV, 7QX, 7QZ, 7RA, 7RB, 7RC, 7RD, 7RV (DVD navigation)
Concerns:
New map data record for navigation due to data changes in vehicle production.
Procedure for using a map data record.
Date: 100112Porsche Cayenne Turbo S (9PA) V84.8L Turbo
10.52SS
Page 7
Information:
Replacement of a PCM device due to a complaint or spare parts requirement.
Update to new map data version.
The information below relates to "PCM 3.0 with navigation" and includes instructions about what to do in the situations mentioned above
when using a navigation DVD (referred to below as "Navi DVD"). Essentially, the Navi DVDs that are available from the parts department
are only approved for use by authorized Porsche dealers (workshop DVD). The map data record can only be installed on PCM in
conjunction with the PIWIS Tester.
We recommend that you initially order and stock one DVD of each data record version (for the North American market) for these
situations.
New data record:
The change to a new, updated navigation map data record, which is implemented in vehicle production, generally occurs once a year, but
we cannot always ensure that the change date (Release) coincides with the start of the model year. As a result, it can happen that one
map data record covers two model years (e.g. all of MY 09 and the start of MY A (10)) and in exceptional cases, one map data record
can even cover three model years (e.g. end of MY X all of MY Y start of MY Z).
See also > "Release" section.
If a customer has requested that you install a new map data record: > see "Update" section.
Navigation allocation:
The relevant navigation data record for the vehicle (= region) is installed on the PCM system in vehicle production. The allocation of the
data record to the vehicle and model year is entered and stored in the vehicle master data and is protected by the enabling code
Navigation enabling code:
..can be displayed using the PIWIS Tester and PIWIS information system. The data record is only activated for the navigation system
by entering a valid enabling code.
PIWIS Tester: > 'PCM 3.0' > 'Coding' > 'Enabling code'.
PIWIS information system: Only with the required access rights: > 'Job Management' > Enter 'Vehicle Ident. No.' > 'Vehicle code
information' > Display selected codes 'PCM enabling code for navigation maps .... (as at vehicle delivery)'.
Navigation software:
The navigation data record stored in PCM has an 11digit software number, which can be displayed using the PIWIS Tester and PIWIS
information system. The software number gives an indication of how uptodate the data record is. It is not a part number that can be
used for ordering spare parts. PIWIS Tester: > 'PCM 3.0' > 'Navigation' > 'Identification'.
PIWIS information system: Only with the required access rights: > 'Job Management' > Enter 'Vehicle Ident. No.' > 'Vehicle
information' > 'Electrics/Electronics information' section > 'PCM software version, maps (as at vehicle delivery)'.
DVD Part No.:
The 11digit software number can be used to determine the allocation to the corresponding DVD part number and Ino. (= region) using
> PET ("Designation" column).
DVD hardware:
The following data, along with other information, is printed on the top side of the Navi DVD (example):
Release:Porsche Cayenne Turbo S (9PA) V84.8L Turbo
10.52SS
Page 8
Release version 08.2009 (08 = month, 2009 = year) is currently valid at the time this information was created. The first release is
06.2008.
The change date in vehicle production can be more or less worked out from the release number. This date is generally 1 to 3 months
later than the month specified in the release number.
PCM replacement:
When replacing a PCM device in the event of a complaint or when a spare part is required, the map data record that is valid for the
vehicle must be installed again using the corresponding Navi DVD. The enabling code you already have is used for enabling the data
record, see > 911019 Removing and installing PCM 3.0 display and operator control unit.
If you try to install a more recent Navi DVD (update) or the Navi DVD for another region, this is only possible using a new enabling code.
See > 'Update' section below.
Update:
The previous map data record can be updated to a newer version or the data record for another region can be installed at the request of
the customer. Both measures can only be carried out using a new enabling code and at the customer's expense and are available from
"Tequipment", see > 911000 PCM3.0 Navigation update
References Cayenne:
> 911019 Removing and installing PCM 3.0 display and operator control unit
> 911000 PCM3.0 Navigation update
Porsche PCM 3.0(R) New Map Data Information
Service
9
52/09 ENU 9110
Jan 12, 2010
PCM 3.0 With Navigation: New Map Data Record (52/09)
Model year: as of 2009
Vehicle Type:
Cayenne/Cayenne S/Cayenne GTS/Cayenne Turbo
Equipment:
Porsche Communication Management 3.0 with navigation (PCM 3.0)
Ino. 7T1 (Navigation)
Ino. 7QT, 7QV, 7QX, 7QZ, 7RA, 7RB, 7RC, 7RD, 7RV (DVD navigation)
Concerns:
New map data record for navigation due to data changes in vehicle production.
Procedure for using a map data record.
Date: 100112Porsche Cayenne Turbo S (9PA) V84.8L Turbo
10.52SS
Page 7
Information:
Replacement of a PCM device due to a complaint or spare parts requirement.
Update to new map data version.
The information below relates to "PCM 3.0 with navigation" and includes instructions about what to do in the situations mentioned above
when using a navigation DVD (referred to below as "Navi DVD"). Essentially, the Navi DVDs that are available from the parts department
are only approved for use by authorized Porsche dealers (workshop DVD). The map data record can only be installed on PCM in
conjunction with the PIWIS Tester.
We recommend that you initially order and stock one DVD of each data record version (for the North American market) for these
situations.
New data record:
The change to a new, updated navigation map data record, which is implemented in vehicle production, generally occurs once a year, but
we cannot always ensure that the change date (Release) coincides with the start of the model year. As a result, it can happen that one
map data record covers two model years (e.g. all of MY 09 and the start of MY A (10)) and in exceptional cases, one map data record
can even cover three model years (e.g. end of MY X all of MY Y start of MY Z).
See also > "Release" section.
If a customer has requested that you install a new map data record: > see "Update" section.
Navigation allocation:
The relevant navigation data record for the vehicle (= region) is installed on the PCM system in vehicle production. The allocation of the
data record to the vehicle and model year is entered and stored in the vehicle master data and is protected by the enabling code
Navigation enabling code:
..can be displayed using the PIWIS Tester and PIWIS information system. The data record is only activated for the navigation system
by entering a valid enabling code.
PIWIS Tester: > 'PCM 3.0' > 'Coding' > 'Enabling code'.
PIWIS information system: Only with the required access rights: > 'Job Management' > Enter 'Vehicle Ident. No.' > 'Vehicle code
information' > Display selected codes 'PCM enabling code for navigation maps .... (as at vehicle delivery)'.
Navigation software:
The navigation data record stored in PCM has an 11digit software number, which can be displayed using the PIWIS Tester and PIWIS
information system. The software number gives an indication of how uptodate the data record is. It is not a part number that can be
used for ordering spare parts. PIWIS Tester: > 'PCM 3.0' > 'Navigation' > 'Identification'.
PIWIS information system: Only with the required access rights: > 'Job Management' > Enter 'Vehicle Ident. No.' > 'Vehicle
information' > 'Electrics/Electronics information' section > 'PCM software version, maps (as at vehicle delivery)'.
DVD Part No.:
The 11digit software number can be used to determine the allocation to the corresponding DVD part number and Ino. (= region) using
> PET ("Designation" column).
DVD hardware:
The following data, along with other information, is printed on the top side of the Navi DVD (example):
Release:Porsche Cayenne Turbo S (9PA) V84.8L Turbo
10.52SS
Page 8
Release version 08.2009 (08 = month, 2009 = year) is currently valid at the time this information was created. The first release is
06.2008.
The change date in vehicle production can be more or less worked out from the release number. This date is generally 1 to 3 months
later than the month specified in the release number.
PCM replacement:
When replacing a PCM device in the event of a complaint or when a spare part is required, the map data record that is valid for the
vehicle must be installed again using the corresponding Navi DVD. The enabling code you already have is used for enabling the data
record, see > 911019 Removing and installing PCM 3.0 display and operator control unit.
If you try to install a more recent Navi DVD (update) or the Navi DVD for another region, this is only possible using a new enabling code.
See > 'Update' section below.
Update:
The previous map data record can be updated to a newer version or the data record for another region can be installed at the request of
the customer. Both measures can only be carried out using a new enabling code and at the customer's expense and are available from
"Tequipment", see > 911000 PCM3.0 Navigation update
References Cayenne:
> 911019 Removing and installing PCM 3.0 display and operator control unit
> 911000 PCM3.0 Navigation update