2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 1
Vehicle: All Technical Service Bulletins
Audio System Rattling Noise From CD Changer Area
Service
6
23/11 ENU 6831
The present document was valid at the time of print. A later version may be available online
Spare Parts Requirements For CD Box: Subsequent Work For Eliminating Noises (23/11)
Model year: as of 2005
Vehicle Type:
Boxster (987)/Boxster S (987)
Cayman/Cayman S
Vehicle Type:
911 Carrera (997)/911 Carrera S (997)
911 Turbo (997)/911 GT2 (997)/911 GT3 (997)
Equipment:
CD box (Ino. 424)
Concerns:
Reworking CD box in order to eliminate noises:
Adhering felt
Information:
Spare parts requirements for CD box
Rattling noises can come from this area as a result of tolerances between the CD box and glove box.
Since September 2010, a piece of felt is applied to the top of the CD box during vehicle production in order to eliminate noises.
Action Required:
Before installing a replacement CD box, adhered the piece of felt.
Parts Info
Tools/Materials
Work Procedure:2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 2
Stick a strip of felt to the top of the CD box.
1 Clean the bonding area on the top of the CD box with isopropyl and a clean cloth.
2 Remove protective film from the felt (selfadhesive).
3 Center the felt (arrow) on the top of the CD box and stick it on 89 mm from the rear edge of the box.
4 Install CD box.
References
Copyright ? 2013, ALLDATA
10.52SS
Page 1
Vehicle: All Technical Service Bulletins
Audio System Rattling Noise From CD Changer Area
Service
6
23/11 ENU 6831
The present document was valid at the time of print. A later version may be available online
Spare Parts Requirements For CD Box: Subsequent Work For Eliminating Noises (23/11)
Model year: as of 2005
Vehicle Type:
Boxster (987)/Boxster S (987)
Cayman/Cayman S
Vehicle Type:
911 Carrera (997)/911 Carrera S (997)
911 Turbo (997)/911 GT2 (997)/911 GT3 (997)
Equipment:
CD box (Ino. 424)
Concerns:
Reworking CD box in order to eliminate noises:
Adhering felt
Information:
Spare parts requirements for CD box
Rattling noises can come from this area as a result of tolerances between the CD box and glove box.
Since September 2010, a piece of felt is applied to the top of the CD box during vehicle production in order to eliminate noises.
Action Required:
Before installing a replacement CD box, adhered the piece of felt.
Parts Info
Tools/Materials
Work Procedure:2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 2
Stick a strip of felt to the top of the CD box.
1 Clean the bonding area on the top of the CD box with isopropyl and a clean cloth.
2 Remove protective film from the felt (selfadhesive).
3 Center the felt (arrow) on the top of the CD box and stick it on 89 mm from the rear edge of the box.
4 Install CD box.
References