Monday 29 February 2016

Brakes - Electric Parking Brake Control Unit

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo

Vehicle: All Technical Service Bulletins

Brakes - Electric Parking Brake Control Unit

4

36/09 ENU 4662

Oct 9, 2009

Spare Parts Requirements:

Control Unit for Electric Parking Brake (36/09)

Vehicle Type:

Panamera S / Panamera Turbo

Model Year:

2010

Concerns:

Control unit for electric parking brake (referred to below as "EPB").

Information:

Spare parts requirements/repairs:

- Control unit with part-number index 07 is not available.

When vehicle production began, actuators (part numbers  70.352.091.01/...092.01) were installed with the EPB control unit 970.618.109.07.

Modified actuators with a new part number have been installed since the middle of August 2009. The software for the EPB control unit has been

updated accordingly for the modified actuators and the control unit part number is new.

Date of

Introduction:

Mid-August 2009, as of VIN:

WP0AB2 A75AL 060328 USA WP0AC2 A78AL 090176 USA

Parts Info:

970.352.091.02       New/--> Actuator (left) 970.352.092.02       New/--> Actuator (right) 970.618.109.08       New/--> EPB control unit

Repairs:

The previously used EPB control unit with part-number index 07 is not available for carrying out repairs on vehicles manufactured before the

specified VINs.

The control unit with part-number index08 is now used instead of the unavailable control unit (part-number index 07).

When installing the new control unit, the old actuators must be replaced (because of the modified control unit software) with actuators with

part-number index 02 (see also --> Technical Information '468500 Spare parts requirements: Actuator for electric parking brake (34/09)').

Information

The actuators can be differentiated (old/new and left/right) based on the part number engraved on the actuator.

Check the current control unit part number when installed: --> PIWIS Tester II 9818 must be connected, then select --> 'Control units' --> 'Parking brake' and press --> [F12].

Old and new actuators and control units must not be installed together. Work Procedure:

1      Replace both actuators (left and right side of the vehicle) with actuators 970.352.091.02 and .092.02, see --> Workshop Manual '468519

Removing and installing spreader device (EPB actuator)'.

2      Replace the old control unit, see --> Workshop Manual '466219 Removing and installing control unit for electric parking brake'.

References:

-----------------------------------------------------Page 1-----------------------------------------------------

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo

--> Workshop Manual '468519 Removing and installing spreader device (EPB actuator)'

--> Workshop Manual '466219 Removing and installing control unit for electric parking brake'

--> Technical Information '468500 Spare parts requirements: Actuator for electric parking brake (34/09)'

Disclaimer

-----------------------------------------------------Page 2-----------------------------------------------------