U0319
U0319
Diagnosis information - CAN
Fault entry in specified control unit NOTE: Internal function test completed. Diagnostic conditions
The control unit initially tests internal function sequences after wake-up. If they are OK, all diagnosable outputs are then tested and any faults are stored.Control unit wake-up through:- Event-induced CAN message
- Wake-up signal via wake-up line
- key contact (terminal S)
- Ignition on
Possible fault causes
- Control unit is incorrectly coded
- Periphery connected to specified control unit is incorrect
- Control unit faulty (in most cases the cause is not the control unit but incorrect coding.)
Fault effects
- The specified control unit sends only substitute values via the CAN.
- Other control units detect these substitute values and set this fault code.
Showing posts with label U0319. Show all posts
Showing posts with label U0319. Show all posts
Thursday, 27 June 2019
U0319
Subscribe to:
Posts (Atom)