Vehicle: All Technical Service Bulletins
PCM3.1(R) - Logbook Coding
9
Panamera (970)
19/09 ENU 9110
Sep 16, 2009
PCM3.1 - Logbook
INFORMATION:
Coding logbook
Model Year:
As of 2010
Restriction:
Only for vehicles with PCM3.1 (I-no. 672).
INFORMATION:
The optional electronic logbook for PCM3.1 supports the driver in maintaining a logbook by recording all relevant data for the type of trip (private,
business), much of it automatically, and reducing user input to a minimum. PCM3 automatically records every trip > 100 m. Trip recording starts as
soon as the key is inserted in the ignition and ends when it is removed. PCM3.1 will automatically record the following data:
- Date/time of departure and arrival - Mileage at the start and end of the trip
- Start and destination address (location, street, country)
If the data is to be transferred to a PC, the recorded data is copied from PCM3.1 either via Bluetooth?or via the optional USB interface for PCM3.1.
The data can be read in, edited and printed using the accompanying PC software. This software meets the requirements of the German tax authorities for documenting automatic logbook recordings.
INFORMATION:
The following data is required in order to activate the function (enabling code): - Part number of the retrofit kit
- Vehicle identification number (VIN) of the vehicle to be converted - Order number used for ordering parts
These components require a VIN-specific enabling code and will not function without it. To get the enabling code, order the applicable kit via your normal parts channels (POLARIS). You must then submit a PTEC/PTAR with the correct VIN, Part Number and PCNA order number to PCNA Parts Support. The PTEC will be returned to you in 1+ working days, advising you that the code is now displayed in the PIWIS System. Consult Parts Bulletin GR13D90 for additional ordering details.
Once you confirm the order, the "Logbook" enabling code can be obtained from the vehicle code information for the vehicle to be converted in the PPN (PIWIS).
Parts Info:
955.044.900.29 -> Logbook
Parts List:
Tools:
PIWIS Tester 2 9818
Work Procedure:
1. Connect a battery charger. -> Workshop Manual '2X00IN Battery trickle charging'
NOTE:
Voltage drop
- Risk of irreparable damage to control unit
-----------------------------------------------------Page 1-----------------------------------------------------
2010 Porsche Panamera Turbo (970) V8-4.8L Turbo
- Risk of damage to control unit - Fault entries in the control unit
- Coding in the control unit is aborted
- Malfunctions in control unit, even during programming
- Switch off the ignition and remove the ignition key before disconnecting the control unit. - Ensure that the power supply is not interrupted during programming.
- Connect a battery charger with a current rating of at least Nominal value 40 A to the vehicle battery.
INFORMATION:
The PIWIS Tester 2 9818 instructions take precedence since the description may be different with later Tester releases.
The procedure described here has been structured in general terms; different text or additions may appear on the PIWIS Tester 2 9818 .
2. Code logbook in PCM3.1.
2.1 PIWIS Tester 2 9818 must be connected and ignition switched on. 2.2 Select the vehicle type and select PCM control units. Then press [F12]
2.3 Switch to the Maintenance/repairs menu. Select the Function enable function. Then press [F12] 2.4 Select the Logbook function.
Enter the code and confirm by touching the Status cell. Press [F8] to execute. Wait until the message Enable was successful appears. Then press [F12].
2.5 Touch the Overview cell to return to the control unit overview.
Press [F7] to switch to the Additional menu.
Select the Management of vehicle order function. Press [F12] until M numbers appears in the Value group column. Select the coding value 641. When the cell Conn. - after the value Electronic logbook - is touched, a tick appears.
Save the value by pressing [F8]. Wait until the message Modified values have been buffered appears. Press [F12] until [F8] can be activated.
Write values by pressing [F8]. Wait until the message Creation of vehicle order has been completed appears.
Press [F12] to switch to Log management. Open the log and check that vehicle equipment 641 Electronic logbook has been entered. Close the log.
2.6 Press [F11] to switch to the control unit overview.
Select PCM control unit. Then press [F12]. Switch to the Codings/adaptations menu.
Select Automatic coding with coding rules. Then press [F12]. Wait until the message Coding has been completed successfully appears. Then press [F12].
2.7 Once coding is complete, read out the fault memories of all systems, correct any existing faults and erase the fault memories. ->
Workshop Manual '0X01IN Diagnostic system: Reading out fault memory and activating systems'.
2.8 Switch off ignition and disconnect the PIWIS Tester 2 9818.
3. Disconnect the battery charger. ->Workshop Manual '2X00IN Battery trickle charging .' 4. Carry out function test.
INFORMATION: Further information can be found in the PCM3 operating instructions.
4.1 Activate logbook. Press or touch the buttons in the sequence:
CAR->OPTION->SET-CAR->SET logbook->Activate logbook->2x arrow key->Trips Make the entries for the forthcoming trip.
4.2 Test-drive the vehicle, then check the list of trips.
4.3 Clear entries in logbook. Press or touch the buttons in the sequence:
CAR->OPTION->SET-CAR->SET logbook->Delete logbook->All trips->YES->Arrow key->Deactivate logbook.
Working Time:
Disclaimer
-----------------------------------------------------Page 2-----------------------------------------------------