Porsche Cayenne Turbo (9PA) Technical Service Bulletin # 376/09 Date: 100226
A/T - Revised A/T Cooler Line Connection
3
76109
ENU
3860
Feb 26, 2010
The present document was valid at the time of print. A later version may be available online
Tiptronic Transmission: Modified ATF Cooler Connection (08-10)
(76/09)
Model year:
as of 2007 up to 2010
2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 5
Vehicle Type:
Cayenne/Cayenne S/Cayenne GTS/Cayenne Transsyberia/Cayenne PD Edition 3
Equipment:
Tiptronic transmission (I-no. GOR)
Concerns:
Modified threaded connection for lines on ATF cooler.
Information:
Repairs or spare parts requirements:
- ATF cooler,
- ATF cooler connection supply and return lines (referred to below as lines").
As of December 4, 2009, the lines on the ATF cooler connection have changed.
Identifying feature of new attachment:
The supply and return lines are now secured to the ATF cooler with a clamped threaded connection (--> Figure 1).
Previous attachment: Lines secured to cooler using union nut.
The Workshop Manual has been changed accordingly.
Date of Introduction:
December 4, 2009 as of vehicle identification number
WP1 AA2 9P9AL A10019
Repairs:
The following applies for spare parts requirements:
^ Previous ATF cooler (threaded connection with union nut):
Parts no longer available after existing supplies are used up.
^ New ATF cooler (clamped threaded connection):
When installing a new ATF cooler in a vehicle with the old threaded connection for lines (union nut), the new supply and return lines must be
installed.
^ Previous supply and return lines (threaded connection with union nut):
Parts still available for spare parts requirements.
2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 6
Parts Info:
References:
--> 386019 Removing and installing ATF cooler
9PAAG1, 9PAAH1, 9PAAL1, 9PAAR1, 9PAAS1
Model year as of 2007, Model year up to 2010
C02, C36
Disclaimer