2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 1
Vehicle: All Technical Service Bulletins
PCM3.0(R) Voice Control System Retrofitting
PCM3.0 Voice Control System (Ino. 671)
Information:
Retrofitting
Model Year:
As of 2009
Restriction:
Only for vehicles with navigation system (Ino. 672).
NOTE:
Virtually all PCM3.0 functions can be controlled via the latest generation of the voice control system.
Each menu item can generally be spoken exactly as it appears on the screen. The voice control system recognizes commands or
number sequences, irrespective of who says them. It provides acoustic feedback and guides the user through the functions. The
system does not need to be taught. Phone book entries can be called, radio stations can be set or a navigation destination can be
entered directly by speaking whole words.
For more information on operation and the various functions available, refer to the "PCM" operating instructions.
After ordering, i.e. entering the part number and Vehicle Identification Number (VIN) in POLARIS Lock/Key parts order screen, the
enabling code should be displayed within one day once the VIN is entered in the Vehicle code information column in the PIWIS
information system.
Parts Info:
997.044.902.36>Voice control system, set
Parts List:2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 2
Materials:
Wrapping tape (commercially available)
Tools:
PIWIS Tester 9718
Pressout tool set Nr. 155 Pos. 1
Component diagram:
INFORMATION For a better understanding of the system layout, see system diagram , Figure 3.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 3
Work Procedure:
1. Preparatory work.
1.1. Disconnect the battery. > Workshop Manual '2X00IN02 Work instructions after disconnecting the battery'
1.2. Remove steering column switch. > Workshop Manual '94501900 Removing and installing steering column switch'
1.3. Only for vehicles on which the microphone wire harness must be installed (see Step 2.1)
1.3.1. Remove trim panel under dashboard (driver's side). > Workshop Manual 701919 Removing and installing trim panel
under dashboard'
1.3.2. Remove PCM3.0. > Workshop Manual '911019 Removing and installing display and operator control unit PCM 3.0'
2. Install microphone wire harness.
INFORMATION
The table shows whether a microphone wire harness needs to be retrofitted.
2.1. Overview of installing microphone wire harness:
Vehicle equipment
BOSE sound package (lno. 680)
ASK sound package (lno. 490)
Telephone module (lno. 666)
Mobile Phone handsfree facility (lnno. 619)
BOSE sound package (lno. 680)
and telephone module (lno. 666)
BOSE sound package (lno. 680)
and mobile Phone handsfree facility (lnno. 619)
ASK sound package (lno. 490) and
telephone module (lno. 666)
ASK sound package (lno. 490) and
handsfree facility (lnno. 619)
2.2. Prepare wire harness for microphone.
Microphone wire harness Installation
Yes
Yes
No
No
No
No
No
No2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 4
2.2.1. Open lock on white connector housing > Figure 4 1.
INFORMATION Ensure socket contact is seated securely.
2.2.2. Insert socket contact of line BU 0.35(squared) into chamber 1 of the white connector housing.
Insert socket contact of line YE 0.35(squared) into chamber 2 of the white connector housing.
2.2.3. Close lock on white connector housing.
2.2.4. Lift up locking mechanism > Figure 5 arrow A on wire harness for microphones and pull the plug socket > Figure 5
1 out of the plug carrier > Figure 5 arrow B.
2.3. Open wiring duct .> Figure 61.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 5
2.4. Route wire harness for microphones > Figure 71 and secure with a tiewrap or wrapping tape.
Steering column > Figure 72 > into wiring duct > Figure 7 3> main wire harness > Figure 7A> PCM installation slot
The microphone wire harness must project 260 mm out of the wiring duct > Figure 8 1in order to secure it.
Dimension X 260 mm
2.5. Close wiring duct > Figure 9 1.
INFORMATION Socket contacts also need to be changed, depending on the vehicle equipment.
2.6. Only for vehicles with BOSE sound system (Ino. 680) or ASK sound package (Ino. 490) or TV tuner(Ino. 676): Change
socket contacts.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 6
2.6.1. Overview of socket contacts to be changed.
2.6.2. Press locking mechanism down > Figure 10 arrow A and pull standard connector module C (coding: blue) > Figure
10 1 out of the PCM central connector > Figure 10 2 (> Figure 10 arrow B).
2.6.3. Lift up locking mechanism > Figure 11 arrow A and pull the plug socket > Figure 111 out of the plug carrier >
Figure 11 arrow B.
INFORMATION Ensure socket contact is seated securely.
2.6.4. Press socket contact of WH/RD line (chamber C4), for example, out of the standard connector housing > Figure
121using a pressout tool and insert it into the connector housing (retrofit kit) > Figure 12 Z.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 7
2.7. Insert plug socket > Figure 131 into plug carrier > Figure 13 Z.
2.8. Insert connector module C (coding: blue) > Figure 14 arrow from the microphone wire harness into the PCM central
connector.
2.9. Only for vehicles with BOSE sound package (Ino. 680):
2.9.1. Open lock on microphone connector housing > Figure 16 1.
2.9.2. Press socket contacts out of the connector housing using pressout tool 88089.
INFORMATION
Ensure socket contact is seated securely.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 8
2.9.3. Insert socket contact of line RD 0.5(squared) into chamber 3 of the white connector housing.
Insert socket contact of line RD/BN 0.5(squared) into chamber 4 of the white connector housing.
2.9.4. Close lock on white connector housing.
2.10. Insert connector module C (coding: blue) > Figure 17arrowfrom the microphone wire harness into the PCM central
connector.
3. Install microphones.
INFORMATION Either two microphones or no microphones must be retrofitted, depending on the vehicle equipment.
3.1.
Overview of microphone fixtures
Vehicle equipment
BOSE sound package (lno. 680)
ASK sound package (lno. 490)
Telephone module (lno. 666)
Mobile Phone handsfree facility (lnno. 619)
BOSE sound package (lno. 680)
and telephone module (lno. 666)
BOSE sound package (lno. 680)
and mobile Phone handsfree facility (lnno. 619)
ASK sound package (lno. 490) and
telephone module (lno. 666)
ASK sound package (lno. 490) and
handsfree facility (lnno. 619)
3.2.
Microphone Installation
Yes
Yes
No
No
No
No
No
No
Install microphone.
3.2.1. Unclip the standard microphone (e.g. BOSE sound system, coding: black) > Figure 181from the trim panel.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 9
3.2.2. Clip sound microphone/handsfree microphone (coding: white) > Figure 19 2 and handsfree microphone (coding:
light blue) > Figure J91 into the trim panel.
4. Install actuating lever for onboard computer (retrofit kit).
4.1. Remove contact unit and electronic unit. > Workshop Manual '94503700 Disassembling and assembling steering column
switch'
4.2. Pull standard actuating lever for onboard computer > Figure 20 1 down and disengage it.
Engage actuating lever for onboard computer (retrofit kit) > Figure 20 2 and bend it up.
4.3. Fit electronic unit and contact unit. > Workshop Manual '94503700 Disassembling and assembling steering column switch'
5. Concluding work
5.1. Install steering column switch. > Workshop Manual '94501900 Removing and installing steering column switch'
5.2. Insert new tiewraps > Figure 211 into the trim panel under the dashboard.
5.3. Install trim panel under dashboard (driver's side). > Workshop Manual701919 Removing and installing trim panel under
dashboard'
5.4. Install PCM3.0. > Workshop Manual '911019 Removing and installing PCM 3.0 display and operator control unit'
5.5. Connect the battery. > Workshop Manual '2X00IN02 Work instructions after disconnecting the battery'2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 10
5.6. Connect battery charger. > Workshop Manual '2X00IN03 Battery trickle charging'
NOTICE
Voltage drop
Risk of irreparable damage to control unit
Risk of damage to control unit
Fault entries in the control unit
Coding in the control unit is aborted
Malfunctions in control unit, even during programming
Switch off the ignition and remove the ignition key before disconnecting the control unit.
Ensure that the power supply is not interrupted during programming.
Connect a battery charger with a current rating of at least Nominal value 40 A to the vehicle battery.
INFORMATION
The PIWIS Tester 9718 instructions take precedence and in the event of a discrepancy these are the instructions that
must be followed. Deviations may occur with later software versions.
The procedure described here has been structured in general terms; different text or additions may appear in the PIWIS
Tester 9718.
5.7. Code the control switch.
5.7.1. PIWIS Tester 9718 must be connected and ignition switched on.
5.7.2. Select vehicle and run control unit search.
5.7.3. Select Gateway control unit.
5.7.4. Select Coding in the Gateway function selection menu. Press F12 to continue.
5.7.5. Select Required installed components lists in the Gateway/Coding menu. Press F12 to continue.
5.7.6. Select SBS in the Gateway/Coding menu. Press F12 to continue.
5.7.7. Select the option installed in the Gateway/Change coding menu and press F8 to change the coding to 'installed'. Press
F11 to return to the control unit selection screen.
5.7.8. Select Steering wheel electronics control unit.
5.7.9. Select Coding in the Steering wheel electronics function selection menu. Press F12 to continue.
5.7.10. Select Push to Talk in the Steering wheel electronics/Coding menu. Press F12 to continue.
5.7.11. Select the option installed in the Steering wheel electronics/Coding menu and press F8 to change the coding to
'installed'. Press F11 to return to the control unit selection screen.
5.7.12. Select PCM3 control unit.
5.7.13. Select PCM3 in the PCM3 function selection menu. Press F12 to continue.
5.7.14. Select Coding in the PCM3 function selection menu. Press F12 to continue.
5.7.15. Select Enabling code in the PCM3/Coding menu. Press F12 to continue.
5.7.16. Select Enabling code for voice control in the PCM/Enabling code menu. Press F12 to continue.
5.7.17. Enter the enabling code and press F8 to start coding.
5.7.18. Press F11 to return to the main menu. The system is initialised.
5.7.19. Once coding is complete, read out the fault memories of all systems, correct any existing faults and erase the fault
memories.
5.7.20. Switch off ignition and disconnect PIWIS Tester 9718.
5.8. Disconnect battery charger. > Workshop Manual '2X00IN03 Battery trickle charging'
Working Time:
Disclaimer
Copyright ? 2013, ALLDATA
10.52SS
Page 1
Vehicle: All Technical Service Bulletins
PCM3.0(R) Voice Control System Retrofitting
PCM3.0 Voice Control System (Ino. 671)
Information:
Retrofitting
Model Year:
As of 2009
Restriction:
Only for vehicles with navigation system (Ino. 672).
NOTE:
Virtually all PCM3.0 functions can be controlled via the latest generation of the voice control system.
Each menu item can generally be spoken exactly as it appears on the screen. The voice control system recognizes commands or
number sequences, irrespective of who says them. It provides acoustic feedback and guides the user through the functions. The
system does not need to be taught. Phone book entries can be called, radio stations can be set or a navigation destination can be
entered directly by speaking whole words.
For more information on operation and the various functions available, refer to the "PCM" operating instructions.
After ordering, i.e. entering the part number and Vehicle Identification Number (VIN) in POLARIS Lock/Key parts order screen, the
enabling code should be displayed within one day once the VIN is entered in the Vehicle code information column in the PIWIS
information system.
Parts Info:
997.044.902.36>Voice control system, set
Parts List:2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 2
Materials:
Wrapping tape (commercially available)
Tools:
PIWIS Tester 9718
Pressout tool set Nr. 155 Pos. 1
Component diagram:
INFORMATION For a better understanding of the system layout, see system diagram , Figure 3.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 3
Work Procedure:
1. Preparatory work.
1.1. Disconnect the battery. > Workshop Manual '2X00IN02 Work instructions after disconnecting the battery'
1.2. Remove steering column switch. > Workshop Manual '94501900 Removing and installing steering column switch'
1.3. Only for vehicles on which the microphone wire harness must be installed (see Step 2.1)
1.3.1. Remove trim panel under dashboard (driver's side). > Workshop Manual 701919 Removing and installing trim panel
under dashboard'
1.3.2. Remove PCM3.0. > Workshop Manual '911019 Removing and installing display and operator control unit PCM 3.0'
2. Install microphone wire harness.
INFORMATION
The table shows whether a microphone wire harness needs to be retrofitted.
2.1. Overview of installing microphone wire harness:
Vehicle equipment
BOSE sound package (lno. 680)
ASK sound package (lno. 490)
Telephone module (lno. 666)
Mobile Phone handsfree facility (lnno. 619)
BOSE sound package (lno. 680)
and telephone module (lno. 666)
BOSE sound package (lno. 680)
and mobile Phone handsfree facility (lnno. 619)
ASK sound package (lno. 490) and
telephone module (lno. 666)
ASK sound package (lno. 490) and
handsfree facility (lnno. 619)
2.2. Prepare wire harness for microphone.
Microphone wire harness Installation
Yes
Yes
No
No
No
No
No
No2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 4
2.2.1. Open lock on white connector housing > Figure 4 1.
INFORMATION Ensure socket contact is seated securely.
2.2.2. Insert socket contact of line BU 0.35(squared) into chamber 1 of the white connector housing.
Insert socket contact of line YE 0.35(squared) into chamber 2 of the white connector housing.
2.2.3. Close lock on white connector housing.
2.2.4. Lift up locking mechanism > Figure 5 arrow A on wire harness for microphones and pull the plug socket > Figure 5
1 out of the plug carrier > Figure 5 arrow B.
2.3. Open wiring duct .> Figure 61.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 5
2.4. Route wire harness for microphones > Figure 71 and secure with a tiewrap or wrapping tape.
Steering column > Figure 72 > into wiring duct > Figure 7 3> main wire harness > Figure 7A> PCM installation slot
The microphone wire harness must project 260 mm out of the wiring duct > Figure 8 1in order to secure it.
Dimension X 260 mm
2.5. Close wiring duct > Figure 9 1.
INFORMATION Socket contacts also need to be changed, depending on the vehicle equipment.
2.6. Only for vehicles with BOSE sound system (Ino. 680) or ASK sound package (Ino. 490) or TV tuner(Ino. 676): Change
socket contacts.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 6
2.6.1. Overview of socket contacts to be changed.
2.6.2. Press locking mechanism down > Figure 10 arrow A and pull standard connector module C (coding: blue) > Figure
10 1 out of the PCM central connector > Figure 10 2 (> Figure 10 arrow B).
2.6.3. Lift up locking mechanism > Figure 11 arrow A and pull the plug socket > Figure 111 out of the plug carrier >
Figure 11 arrow B.
INFORMATION Ensure socket contact is seated securely.
2.6.4. Press socket contact of WH/RD line (chamber C4), for example, out of the standard connector housing > Figure
121using a pressout tool and insert it into the connector housing (retrofit kit) > Figure 12 Z.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 7
2.7. Insert plug socket > Figure 131 into plug carrier > Figure 13 Z.
2.8. Insert connector module C (coding: blue) > Figure 14 arrow from the microphone wire harness into the PCM central
connector.
2.9. Only for vehicles with BOSE sound package (Ino. 680):
2.9.1. Open lock on microphone connector housing > Figure 16 1.
2.9.2. Press socket contacts out of the connector housing using pressout tool 88089.
INFORMATION
Ensure socket contact is seated securely.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 8
2.9.3. Insert socket contact of line RD 0.5(squared) into chamber 3 of the white connector housing.
Insert socket contact of line RD/BN 0.5(squared) into chamber 4 of the white connector housing.
2.9.4. Close lock on white connector housing.
2.10. Insert connector module C (coding: blue) > Figure 17arrowfrom the microphone wire harness into the PCM central
connector.
3. Install microphones.
INFORMATION Either two microphones or no microphones must be retrofitted, depending on the vehicle equipment.
3.1.
Overview of microphone fixtures
Vehicle equipment
BOSE sound package (lno. 680)
ASK sound package (lno. 490)
Telephone module (lno. 666)
Mobile Phone handsfree facility (lnno. 619)
BOSE sound package (lno. 680)
and telephone module (lno. 666)
BOSE sound package (lno. 680)
and mobile Phone handsfree facility (lnno. 619)
ASK sound package (lno. 490) and
telephone module (lno. 666)
ASK sound package (lno. 490) and
handsfree facility (lnno. 619)
3.2.
Microphone Installation
Yes
Yes
No
No
No
No
No
No
Install microphone.
3.2.1. Unclip the standard microphone (e.g. BOSE sound system, coding: black) > Figure 181from the trim panel.2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 9
3.2.2. Clip sound microphone/handsfree microphone (coding: white) > Figure 19 2 and handsfree microphone (coding:
light blue) > Figure J91 into the trim panel.
4. Install actuating lever for onboard computer (retrofit kit).
4.1. Remove contact unit and electronic unit. > Workshop Manual '94503700 Disassembling and assembling steering column
switch'
4.2. Pull standard actuating lever for onboard computer > Figure 20 1 down and disengage it.
Engage actuating lever for onboard computer (retrofit kit) > Figure 20 2 and bend it up.
4.3. Fit electronic unit and contact unit. > Workshop Manual '94503700 Disassembling and assembling steering column switch'
5. Concluding work
5.1. Install steering column switch. > Workshop Manual '94501900 Removing and installing steering column switch'
5.2. Insert new tiewraps > Figure 211 into the trim panel under the dashboard.
5.3. Install trim panel under dashboard (driver's side). > Workshop Manual701919 Removing and installing trim panel under
dashboard'
5.4. Install PCM3.0. > Workshop Manual '911019 Removing and installing PCM 3.0 display and operator control unit'
5.5. Connect the battery. > Workshop Manual '2X00IN02 Work instructions after disconnecting the battery'2010 Porsche Boxster (987) F62.9L
Copyright ? 2013, ALLDATA
10.52SS
Page 10
5.6. Connect battery charger. > Workshop Manual '2X00IN03 Battery trickle charging'
NOTICE
Voltage drop
Risk of irreparable damage to control unit
Risk of damage to control unit
Fault entries in the control unit
Coding in the control unit is aborted
Malfunctions in control unit, even during programming
Switch off the ignition and remove the ignition key before disconnecting the control unit.
Ensure that the power supply is not interrupted during programming.
Connect a battery charger with a current rating of at least Nominal value 40 A to the vehicle battery.
INFORMATION
The PIWIS Tester 9718 instructions take precedence and in the event of a discrepancy these are the instructions that
must be followed. Deviations may occur with later software versions.
The procedure described here has been structured in general terms; different text or additions may appear in the PIWIS
Tester 9718.
5.7. Code the control switch.
5.7.1. PIWIS Tester 9718 must be connected and ignition switched on.
5.7.2. Select vehicle and run control unit search.
5.7.3. Select Gateway control unit.
5.7.4. Select Coding in the Gateway function selection menu. Press F12 to continue.
5.7.5. Select Required installed components lists in the Gateway/Coding menu. Press F12 to continue.
5.7.6. Select SBS in the Gateway/Coding menu. Press F12 to continue.
5.7.7. Select the option installed in the Gateway/Change coding menu and press F8 to change the coding to 'installed'. Press
F11 to return to the control unit selection screen.
5.7.8. Select Steering wheel electronics control unit.
5.7.9. Select Coding in the Steering wheel electronics function selection menu. Press F12 to continue.
5.7.10. Select Push to Talk in the Steering wheel electronics/Coding menu. Press F12 to continue.
5.7.11. Select the option installed in the Steering wheel electronics/Coding menu and press F8 to change the coding to
'installed'. Press F11 to return to the control unit selection screen.
5.7.12. Select PCM3 control unit.
5.7.13. Select PCM3 in the PCM3 function selection menu. Press F12 to continue.
5.7.14. Select Coding in the PCM3 function selection menu. Press F12 to continue.
5.7.15. Select Enabling code in the PCM3/Coding menu. Press F12 to continue.
5.7.16. Select Enabling code for voice control in the PCM/Enabling code menu. Press F12 to continue.
5.7.17. Enter the enabling code and press F8 to start coding.
5.7.18. Press F11 to return to the main menu. The system is initialised.
5.7.19. Once coding is complete, read out the fault memories of all systems, correct any existing faults and erase the fault
memories.
5.7.20. Switch off ignition and disconnect PIWIS Tester 9718.
5.8. Disconnect battery charger. > Workshop Manual '2X00IN03 Battery trickle charging'
Working Time:
Disclaimer