Audio System - Rattling Noise From CD Changer Area Service 6 23/11 ENU 6831
The present document was valid at the time of print. A later version may be available online
Spare Parts Requirements For CD Box: Subsequent Work For Eliminating Noises (23/11)
Model year: as of 2005
Vehicle Type: Boxster (987)/Boxster S (987) Cayman/Cayman S
2010 Porsche Cayman S (987) F6-3.4L Copyright ? 2013, ALLDATA 10.52SS Page 11
Vehicle Type: 911 Carrera (997)/911 Carrera S (997) 911 Turbo (997)/911 GT2 (997)/911 GT3 (997)
Equipment: CD box (I-no. 424)
Concerns:
Reworking CD box in order to eliminate noises:
- Adhering felt
Information:
Spare parts requirements for CD box
Rattling noises can come from this area as a result of tolerances between the CD box and glove box.
Since September 2010, a piece of felt is applied to the top of the CD box during vehicle production in order to eliminate noises.
Action Required:
Before installing a replacement CD box, adhered the piece of felt.
Parts Info
Tools/Materials
Work Procedure:
Stick a strip of felt to the top of the CD box.
1 Clean the bonding area on the top of the CD box with isopropyl and a clean cloth.
2 Remove protective film from the felt (self-adhesive).
3 Center the felt (-arrow-) on the top of the CD box and stick it on 8-9 mm from the rear edge of the box.
4 Install CD box.
2010 Porsche Cayman S (987) F6-3.4L Copyright ? 2013, ALLDATA 10.52SS Page 12
References
The present document was valid at the time of print. A later version may be available online
Spare Parts Requirements For CD Box: Subsequent Work For Eliminating Noises (23/11)
Model year: as of 2005
Vehicle Type: Boxster (987)/Boxster S (987) Cayman/Cayman S
2010 Porsche Cayman S (987) F6-3.4L Copyright ? 2013, ALLDATA 10.52SS Page 11
Vehicle Type: 911 Carrera (997)/911 Carrera S (997) 911 Turbo (997)/911 GT2 (997)/911 GT3 (997)
Equipment: CD box (I-no. 424)
Concerns:
Reworking CD box in order to eliminate noises:
- Adhering felt
Information:
Spare parts requirements for CD box
Rattling noises can come from this area as a result of tolerances between the CD box and glove box.
Since September 2010, a piece of felt is applied to the top of the CD box during vehicle production in order to eliminate noises.
Action Required:
Before installing a replacement CD box, adhered the piece of felt.
Parts Info
Tools/Materials
Work Procedure:
Stick a strip of felt to the top of the CD box.
1 Clean the bonding area on the top of the CD box with isopropyl and a clean cloth.
2 Remove protective film from the felt (self-adhesive).
3 Center the felt (-arrow-) on the top of the CD box and stick it on 8-9 mm from the rear edge of the box.
4 Install CD box.
2010 Porsche Cayman S (987) F6-3.4L Copyright ? 2013, ALLDATA 10.52SS Page 12
References