2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 1
Actuator: Service and Repair
397719 Removing and Installing Transverse Lock Servo Motor
WM 397719 Removing and installing transverse lock servo motor
Technical values
Removing transverse lock servo motor
Overview of transverse lock servo motor
1. Pull cable plug -1, 2- off the servo motor.
Electric plug on servo motor
2. Pull off fastening element -arrow- for cable lead and place lead aside.
2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 2
Cable lead fastening
3. Unscrew four fastening screws -arrows- on the servo motor.
Servo motor fastening
CAUTION
Emerging oil is harmful to the eyes.
-> Wear personal protective gear (e.g. safety goggles).
Information
- Avoid minor oil leaks when removing the servo motor.
- Place oil collection container underneath.
- Remove servo motor.
Installing transverse lock servo motor
2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 3
Overview of transverse lock servo motor
1. Replace sealing ring -arrow- on servo motor.
Sealing ring on servo motor
- Install servo motor.
- Screw in four screws -arrows- on servo motor. => Tightening torque: 7.5 ftlb.
2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 4
Servo motor fastening
4. Install fastening element -arrow- for cable lead.
Cable lead fastening
5. Connect cable plug -1, 2- to servo motor.
2010 Porsche Cayenne Turbo (9PA) V8-4.8L Turbo Page 5
Electric plug on servo motor
Subsequent work
Subsequent work for servo motor for differential lock
1. Check the oil in the final drive. => 399035 Checking and topping up oil for rear final drive