A L L Diagnostic Trouble Codes ( DTC ): P Code Charts
All Other P Codes
If the P Code is not listed, then:
- Either the code may not be valid for this vehicle or year.
- Or the information published by the OEM does not include this code for this vehicle year.
- Or ALLDATA has not added the information for this code yet.
P0011
P0011
Position of Camshaft in Relation to Crankshaft, Bank 1 - Below Limit
Diagnosis conditions
- Idle speed
- Reference mark recognized
- Engine speed between 600 rpm and 1200 rpm.
- Engine temperature greater than 40 锟斤拷C
- No fault in camshaft position sensors
- Reference mark OK
- No fault in camshaft adjustment
- No fault in engine temperature
- No fault in camshaft adjustment output stage
Possible fault cause
- Allocation of camshaft to inlet camshaft incorrect
Diagnosis/Troubleshooting
NOTE: This fault is stored if the engine was disassembled and the allocation of the camshaft to the inlet camshaft was incorrectly set.
P0012
P0012
Position of Camshaft in Relation to Crankshaft, Bank 1 - Above Limit
Diagnosis conditions
- Idle speed
- Reference mark recognized
- Engine speed between 600 rpm and 1200 rpm.
- Engine temperature greater than 40 锟斤拷C
- No fault in camshaft position sensors
- Reference mark OK
- No fault in camshaft adjustment
- No fault in engine temperature
- No fault in camshaft adjustment output stage
Possible fault cause
- Solenoid hydraulic valve camshaft adjustment faulty
- Allocation of camshaft to inlet camshaft incorrect
Diagnosis/Troubleshooting