2010 Porsche Cayenne S (9PA) V8-4.8L A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 20
P0136
P0136
Diagnosis information - DME V8 DFI
Oxygen sensor behind catalytic converter, bank 1
Diagnostic conditions
- Engine running
- At operating temperature
- Overrun phase
Possible fault causes
- Oxygen sensor faulty
P0137
P0137
Diagnosis information - DME V8 DFI
Oxygen sensor behind catalytic converter, bank 1, below limit value
NOTE: Do not use contact spray on the oxygen sensor's plug connections as this will result in irreparable damage to the lines (blockage of
reference air duct).
NOTE: Do not interchange the oxygen sensor ahead of catalytic converter with the sensor behind the catalytic converter as this will result in
implausible fault entries.
Diagnostic conditions
- No secondary air
- No secondary air diagnosis
- No tank ventilation
- No tank ventilation diagnosis
- No other faults stored
- Engine at operating temperature
- Then drive for 2 min. (mass air flow > 10 kg/h)
- then > 30 sec. Engine idling
Possible fault causes
- Short to ground in signal line
- Short circuit between lines
- Oxygen sensor faulty (short circuit)
Affected contacts on the DME control unit connector
Connector [A]:
- Contact 49
- Contact 50
Affected contacts on the oxygen sensor connector behind catalytic converter, bank 1:
- Contact 3
- Contact 4
P0138
P0138
Diagnosis information - DME V8 DFI
Oxygen sensor behind catalytic converter, bank 1, above limit value
NOTE: Do not use contact spray on the oxygen sensor's plug connections as this will result in irreparable damage to the lines (blockage of
reference air duct).
NOTE: Do not interchange the oxygen sensor ahead of catalytic converter with the sensor behind the catalytic converter as this will result in
implausible fault entries.
Diagnostic conditions
- Engine at operating temperature
- then drive for 2 min.
- then > 30 sec. Engine idling