DME control module, connector II, pin 19 and oxygen sensor jack ahead of catalytic converter, bank 1, pin 2
Diagnosis/troubleshooting
NOTE: Do not use contact spray on the oxygen sensor plug connections as this may cause irreparable damage to the wiring (contamination of the
oxygen sensor via the reference air channel).
P0032
P0032
H02S Heater Control Circuit High
The diagnosis for this fault is different for models with turbo engines and models with naturally-aspirated engines.
Diagnosis/troubleshooting - all turbo models
Diagnostic conditions
- Battery positive voltage between 10 V and 16 V
- Time elapsed after engine start-up greater than 10 seconds
Possible cause of fault
- Short circuit to B+ in triggering wire
Affected terminals
DME control module, connector II, pin 19 and oxygen sensor jack ahead of catalytic converter, bank 1, pin 4
Diagnosis/troubleshooting
NOTE: Do not use contact spray on the oxygen sensor plug connections as this may cause irreparable damage to the wiring (contamination of the