- Short circuit to ground
- Pedal sensor
Affected terminals
Terminal IV/13
NOTE:
- The system operates in pedal sensor standby mode, i.e. the angle of the accelerator pedal is calculated from the residual position sensor signal.
- The maximum pedal value is limited to 30 %.
- The dynamic is limited.
Diagnosis/Troubleshooting
P0223
P0223
Accelerator pedal potentiometer 2 - above limit
Diagnosis conditions
- Ignition on (approx. 30 sec.)
- Battery positive voltage greater than 7 V
Possible fault cause
- Short circuit to B+ in signal wire
- Pedal sensor faulty
Affected terminals
Terminal IV/13
NOTE:
- The system operates in pedal sensor standby mode, i.e. the angle of the accelerator pedal is calculated from the residual position sensor signal.
- The maximum pedal value is limited to 30 %.
- The dynamic is limited.
Diagnosis/troubleshooting
P0230
P0230
Fuel Pump Relay Output Stage - Open Circuit