Wednesday, 27 November 2019

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 578

2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 578



Fault Switch-off time



INFORMATION



The DME control unit receives time information from the gateway control unit at regular intervals when the ignition is on. (approx. 4 Second(s))



Diagnostic conditions



- Engine running



- then Switch off ignition



- immediately afterward Ignition on > 10 Minute(s), at:



- Instrument cluster ready for operation



Possible fault causes



- Gateway control module incorrect (See [Information])



- Incorrect software version Control unit DME (DFI)



- Incorrect software version Gateway control module



- Incorrect software version Instrument cluster



- Fault in area CAN drive or CAN comfort



- Instrument cluster failed or Faulty



Fault setting condition(s)



- No or implausible time pulse from the gateway control unit within 60 seconds. , at:



- Ignition on



INFORMATION



- This affects only the following vehicles:



- Model year 2010



The 2 digits in the 10th + 11th places of the 11-digit part number are relevant:



- 970.618.115.04 --> Gateway control module incorrect



- 970.618.115.05 (or higher) --> Gateway control module correct



P1533



P1533



Diagnosis information - Control unit DME (DFI)



Fault Switch-off time



INFORMATION



The DME control unit receives time information from the gateway control unit at regular intervals when the ignition is on. (approx. 4 Second(s))



Diagnostic conditions



- Engine running



- then Switch off ignition



- immediately afterward Ignition on > 10 Minute(s), at:



- Instrument cluster ready for operation



Possible fault causes



- Gateway control module incorrect (See [Information])



- Incorrect software version Control unit DME (DFI)



- Incorrect software version Gateway control module



- Incorrect software version Instrument cluster



- Fault in area CAN drive or CAN comfort



- Instrument cluster failed or Faulty



Fault setting condition(s)



- No or implausible time pulse from the gateway control unit within 60 seconds. , at:



- Ignition on



INFORMATION



- This affects only the following vehicles:



- Model year 2010



The 2 digits in the 10th + 11th places of the 11-digit part number are relevant:



- 970.618.115.04 --> Gateway control module incorrect



- 970.618.115.05 (or higher) --> Gateway control module correct