2. Check that the circlip in the clutch pipeline is fitted in the groove for the plug-in couplings according to instructions in --> Technical
Information '300100 Clutch pedal sticks' (No. 2/03). To do this, perform a visual check on the plug-in coupling installed in the left plenum
panel in the body front section.
If circlip is fitted correctly: --> Step 3
If circlip is not fitted correctly: Fit the circlips according to instructions in --> Technical Information '300100 Clutch pedal sticks' (No. 2/03).
Note
After installing the circlips, bleed the hydraulic system according to the revised instructions in the Workshop Manual, --> see Preliminary
information --> Workshop Manual '30007 Bleeding the clutch system',
End of remedial action.
3. Bleed the hydraulic system according to the revised instructions in the Workshop Manual, --> see Enclosure and Preliminary information
Workshop Manual '30007 Bleeding the clutch system'.
End of remedial action,
4. If, contrary to expectations, the problem occurs again after you have carried out the remedial action described in Step 2 and Step 3, the
following procedure applies:
4.1 Visually check the clutch pipeline close to the plug connections for leaks. If you find a leak, replace the affected threaded joint. The
procedure for replacing threaded joints is described in --> Workshop Manual '302331 "Converting clutch line on master cylinder" (-->
Step 8).
4.2 Visually check the clutch master cylinder for leaks. If you find a leak, replace the master cylinder, --> Workshop Manual '300519
"Removing and installing the clutch pedal".
4.3 Replace the clutch slave cylinder.
4.4 Bleed the hydraulic system according to the revised instructions in the Workshop Manual, --> see Enclosure and Preliminary
information --> Workshop Manual '30007 Bleeding the clutch system'.
End of remedial action.
Parts Information
References
Enclosure: --> Workshop Manual '30007 Bleeding the clutch system'
DisclaimerTechnical Service Bulletin # 13/99 Date: 000331
Instrument Cluster - Programming After PCM Installed
Boxster
13/99
9110
Binder 8/9, A/C & Electrics