Caution!
Airbag warning light lights up if tie-wrap is insufficiently fastened.
> Bundle all leads on the vehicle-side plug on the plug cap using a tie-wrap (Figure 5).
3.7 Band the seat ground lead again. Add more banding if necessary.
4. Replace belt buckle.
A new belt buckle with gold-plated contact pins must be installed. A strain relief element for the belt buckle wiring harness must be provided
on the seat-side plug.
4.1 Remove the previous belt buckle; see Boxster Technical Manual, Group 6, Repairs, 69 24 19 - Removing and installing the front belt
buckle.
4.2 Install the new belt buckle.
Distinguishing the belt buckles:
The belt buckles can be recognized by way of the stamped part number and by the plug color,
Driver's seat - 996.803.183.09, blue plug
Passengers seat - 996.803.183.10, green plug.
Caution!
Airbag warning light lights up if tie-wrap is insufficiently fastened.
> The tie-wraps for the strain-relief element of the belt buckle wiring harness for the seat-side plug must be installed according to the
following Steps 4.3 or 4.4. respectively.
4.3 Strain relief element for basic passenger's seat with option I No. 370 (elc. height adjustment):
Fasten the belt buckle wiring harness to the cushion carrier with a tie-wrap (Figure 6).
4.4 Strain relief element for all other driver's and passenger's seats: Bundle the leads in the plug housing with a tie-wrap (Figures 7 and 8).