Barriers To Tesla Turbine Commercialization
Tesla, as well as many contemporary scientists and industrialists, believed his new turbine to be revolutionary based on a number of attributes. It was small and easy to manufacture. It only had one moving part. And it was reversible. To demonstrate these benefits, Tesla had several machines built. Juilus C. Czito, the son of Tesla's long-time machinist, built several versions. The first, built in 1906, featured eight disks, each six inches (15.2 centimeters) in diameter. The machine weighed less than 10 pounds (4.5 kilograms) and developed 30 horsepower. It also revealed a deficiency that would make ongoing development of the machine difficult. The rotor attained such high speeds -- 35,000 revolutions per minute (rpm) -- that the metal disks stretched considerably, hampering efficiency. In 1910, Czito and Tesla built a larger model with disks 12 inches (30.5 centimeters) in diameter. It rotated at 10,000 rpm and developed 100 horsepower. Then, in 1911, the pair built a model with disks 9.75 inches (24.8 centimeters) in diameter.
This reduced the speed to 9,000 rpm but increased the power output to 110 horsepower. Bolstered by these successes on a small scale, Tesla built a larger double unit, which he planned to test with steam in the main powerhouse of the New York Edison Company. Each turbine had a rotor bearing disks 18 inches (45.7 centimeters) in diameter. The two turbines were placed in a line on a single base. During the test, Tesla was able to achieve 9,000 rpm and generate 200 horsepower. However, some engineers present at the test, loyal to Edison, claimed that the turbine was a failure based on a misunderstanding of how to measure torque in the new machine. This bad press, combined with the fact that the major electric companies had already invested heavily in bladed turbines, made it difficult for Tesla to attract investors. In Tesla's final attempt to commercialize his invention, he persuaded the Allis-Chalmers Manufacturing Company in Milwaukee to build three turbines.
Two had 20 disks 18 inches in diameter and developed speeds of 12,000 and 10,000 rpm respectively. The third had 15 disks 60 inches (1.5 meters) in diameter and was designed to operate at 3,600 rpm, generating 675 horsepower. During the tests, engineers from Allis-Chalmers grew concerned about both the mechanical efficiency of the turbines, as well as their ability to endure prolonged use. They found that the disks had distorted to a great extent and concluded that the turbine would have eventually failed. Even as late as the 1970s, researchers had difficulty replicating the results reported by Tesla. Warren Rice, a professor of engineering at Arizona State University, created a version of the Tesla turbine that operated at 41 percent efficiency. Some argued that Rice's model deviated from Tesla's exact specifications. But Rice, an expert in fluid dynamics and the Tesla turbine, conducted a literature review of research as late as the 1990s and found that no modern version of Tesla's invention exceeded 30 to 40 percent efficiency. This, more than anything, prevented the Tesla turbine from becoming more widely used. So, where does that leave the Tesla turbine today? As we'll see in the next section, engineers and automotive designers are once again turning their attention to this 100-year-old technology.
With the optional carbon ceramic brakes at each corner, this RS is ready for track day duty if called upon. This 2019 GT3 RS sits on massive Michelin tires, measuring in at 265/35-20 front and 325/30-21 rear. These happen to be the same size at the Porsche 918 Spyder. This car is in as new and delivered condition, showing just 30 miles. Presented in Racing Yellow over a black leather and alcantara interior, it is one of the most striking color combinations in person, and also quite rare. Ordered with the desirable Weissach Package, the hood, roof, and rear spoiler are all exposed carbon fiber for the lightest weight configuration. This 991.2 chassis 2019 Porsche GT3 RS is offered for sale with all original manauls, tools, window sticker, and both keys. No excuses on this one with only 30 miles showing on the odometer. Call today to add this to your collection, or be ready for the next track day with your friends.
Thomas Knoll is pictured on the left, on the right is John Knoll. In the fall of 1987, Thomas Knoll, a doctoral candidate in computer vision, was trying to write-as a diversion from his doctoral-computer code to display grayscale images on a black-white bitmap monitor. Because it wasn鈥檛 directly related to his thesis on computer vision, Knoll thought it had limited value at best. The code was called Display. Knoll wrote it on his Mac Plus computer at home. Little did he know that this initial code would be the very beginning of the phenomenon that would be known as Photoshop. The Display splash screen. Thomas鈥?program caught the attention of his brother, John, who worked at Industrial Light and Magic (ILM) in Marin County, California. ILM was the visual effects arm of Lucasfilm, the famous motion picture company founded by George Lucas. With the release of Star Wars, Lucas had proved that really cool special effects, combined with heroic characters and a 鈥渟hoot-em up script,鈥?could produce a blockbuster motion picture.