Work Instruction 1 - 6
8001 CDR23
8001 CDR23
Supply voltage
Diagnostic conditions
- Ignition on
- Engine running
- Start CDR23
NOTE: The fault memory status (present/not present) is always updated when the motor is running.
Possible cause of fault
- Battery voltage too low less then 9 V for greater then 30 sec'
- Battery voltage too high '> 16 V for > 30 sec'
- Check fuses
- Check battery
- Check regulator of generator
- Check the generator
Affected pins
Radio plug A, pin 4, pin 8
Diagnosis/troubleshooting