- Ohmmeter at plug connection X 11 pin A4 (sleeve side) and ground.
Door lock not actuated.
Display: Infinity Ohms
Door lock actuated towards "Closed".
Display: < 5 Ohms
6. Check passenger's side door lock module switch contact.
- Ohmmeter at plug connection X 12 pin A4 (sleeve side) and ground.
Door lock not actuated.
Display: Infinity Ohms
Door lock actuated towards "Closed".
Display: < 5 Ohms
Test Point 3
Test point 3
Door lock barrel open, actuated for longer than 60 s
Fault code 03
NOTE: This fault can also be caused by incorrect operation (door lock actuated toward "Open" direction for longer than 60 seconds).
1. Pull off plug I on the alarm control module.
2. Disconnect plug connection X 11 (driver's side).
3. Disconnect the plug connection X 12 (passenger's side).
4. Check the leads from the alarm control module plug I pin 15 to the door lock modules for short to ground.
- Ohmmeter on alarm control module plug I pin 15 and ground.
Display: Infinity Ohms
5. Check driver's side door lock module switch contact.
- Ohmmeter at plug connection X 11 pin A6 (sleeve side) and ground.
Door lock not actuated.
Display: Infinity Ohms
Door lock actuated towards "Open".
Display: < 5 Ohms
6. Check passenger's side door lock module switch contact.
- Ohmmeter at plug connection X 12 pin A6 (sleeve side) and ground.
Door lock not actuated.
Display: Infinity Ohms
Door lock actuated towards "Open".
Display: < 5 Ohms
Test Point 4
Test point 4
Door lock barrel closed
Short to ground
Fault code 04
Troubleshooting in accordance with test point 2.
Test Point 5
Test point 5
Door lock barrel open
Short to ground
Fault code 05
Troubleshooting in accordance with test point 3.