8007 CD Changer
8007 CD changer
Mechanical fault while removing CD from magazine
Diagnostic conditions
- Ignition on
- PCM2/CDR23 ON
NOTE:
- The fault memory status (present / not present) is always updated when the motor is running.
- Fault code 8003 is recorded in the PCM2 MMI/CDR23 if the operating buttons are actuated for '>= 1 Min.'.
- Deactivate the 'automatic traffic announcement' before performing the diagnosis on the PCM2/CDR23. If this is not done, the diagnosis will
abort.
Possible cause of fault
- CD changer faulty
NOTE:
- The MOST optical waveguide is connected to the following control modules:
- PCM2/CDR23
- CD changer
- Amplifier
- Telephone/telematics
Diagnosis/troubleshooting