Work Instruction 2 - 3
Adapter Cable No. 9516/3 And Test Tool No. 9516 Instead Of The Seat Belt Tensioner
Work Instruction 4 - 5
NOTE: If the fault memory is cleared, the ignition must be switched off, the ignition key removed and the ignition switched on again in order to
check the fault path. Only in this way is another selftest carried out.
System B 05
Fault Codes 8, 9, 24, 25, 38
Passenger's Seat Belt Tensioner
Diagnostic conditions
- Ignition on
Possible cause of fault
- Incorrect coding
- Short circuit to B+/ground or open circuit in the wiring between the passenger's seat belt tensioner and the airbag triggering unit
- Passenger's seat belt tensioner faulty
- Triggering unit for airbag faulty