Part 2
Fault Code 60
Alarm system I32; 148
Fault code 60
Central locking limit position "Locked" not reached
Diagnostic conditions
- Central locking system activated to "locked"
Possible cause of fault
- Central locking switch faulty
- Short circuit to ground/open circuit in wiring between the alarm system control module, central locking switch or door locks
- Driver's/passenger's door lock faulty
- Control module faulty
Affected terminals
Plug A, pins 5, 28, 29, 30 and 32
Plug B, pins 8 and 9
NOTE: During troubleshooting, the micro switches of the door locks are tested in Step 4. The test is to be used only for vehicles with "safe
position". USA vehicles do not have a safe position; "Driver's door secured" and "Passenger's door secured" are therefore displayed during the