- Door lock not actuated.
Display: infinity
- Door lock actuated towards "Closed".
Display: < 5 ohms
Test Point 3
TEST POINT 3
Door Lock Barrel Open, Actuated For Longer Than 60 Seconds
Fault Code 03
Note:
This fault can also be caused by incorrect operation (door lock actuated towards "Open" for longer than 60 seconds).
Procedure
1. Pull off plug I at the alarm control unit.
2. Disconnect plug connection X 11 (driver's side).
3. Disconnect plug connection X 12 (passenger's side).
4. Check the lines from the alarm control unit plug I pin 15 to the door lock modules for ground shorts.
Ohmmeter at alarm control unit plug I pin 15 and ground.
Display: infinity
5. Check the driver's side door lock module switch contact.
Ohmmeter at plug connection X 11, pin AS (sleeve side) and ground.
- Door lock not actuated.
Display: infinity
- Door lock actuated towards "Open".
Display: < 5 ohms
6. Check passenger's side door lock module switch contact.
Ohmmeter at plug connection X 12 pin AS (sleeve side) and ground.
- Door lock not actuated.
Display: infinity
- Door lock actuated towards "Open".
Display: < 5 ohms
Test Point 4
TEST POINT 4
Door Lock Barrel Closed, Ground Short
Fault Code 04
Fault Effect: No central locking possible
Procedure
1. Pull off plug I at the alarm control unit.