Alarm system I32; 148
Fault code 48
Airbag signal recognised
Diagnostic conditions
- After airbag triggering, the airbag control module sends a signal to the alarm system control module.
- This is a triggering log.
Possible cause of fault
- Airbag triggered
- Open circuit in ground lead from ground point 7 to control module
Affected terminals
Plug B, pin 1
NOTE: Repair vehicle and erase the fault memory after airbag has triggered.
Diagnosis/troubleshooting
Fault Code 49
Alarm system I32; 148
Fault code 49
K lead
Diagnostic conditions
- Ignition on
Possible cause of fault
- K lead connected to ground for at least 2 seconds after ignition is switched on
Affected terminals
Plug A, pin 2
Diagnosis/troubleshooting