Fault Code 47
Alarm system I32; 148
Fault code 47
Central locking synchronisation
Diagnostic conditions
- Central locking system in "unlocked position"
Possible cause of fault
- Short circuit to ground/open circuit between alarm system control module and door locks
- Door lock faulty
Affected terminals
Plug A, pins 5, 19, 28, 30 and 32
Plug B, pin 9
NOTE: During troubleshooting, the micro switches of the door locks are tested in Step 1. The test is to be used only for vehicles with "safe
position". USA vehicles do not have a safe position; "Driver's door secured" and "Passenger's door secured" are therefore displayed during the
Input signals test.
Diagnosis/troubleshooting