Display: < 5 ohms
If no faults are detected in the wire, replace the interior monitoring sensor.
Test Point 34
TEST POINT 34
Interior monitoring Sensor Short To B+ Or Faulty
Fault Code 34
Fault Effect: No passenger compartment monitoring
Procedure
1. Pull plug I off the alarm system control module.
2. Pull off the plug at the interior monitoring sensor.
3. Voltmeter at alarm system control module plug I, pin 24 and ground Switch ignition on.
Display: 0 Volts
If battery voltage is displayed, check the wiring harness for pinches and chafing damage.
4. Ohmmeter at alarm system control module plug I, pin 8 and interior monitoring sensor pin 2
Display: < 5 ohms
It no fault is detected in the wiring, replace the interior monitoring sensor.
Test Point 35
TEST POINT 35
Interior monitoring Sensor Faulty
Fault Code 35
Fault Effect: No passenger compartment monitoring
Procedure
1. Pull plug I off the alarm system control module.
2. Pull off the plug at the interior monitoring sensor.
3. Voltmeter at alarm system control module plug I, pin 24 and ground Switch ignition on.
Display: 0 Volts
If battery voltage is displayed, check the wiring harness for pinches and chafing damage.
4. Ohmmeter at alarm system control module plug I, pin 8 and interior monitoring sensor pin 2
Display: < 5 ohms
It no fault is detected in the wiring, replace the interior monitoring sensor.
Test Point 36
TEST POINT 36
Interior monitoring Sensor Short To B+ Or Faulty
Fault Code 36
Fault Effect: No passenger compartment monitoring