- Check PIN 6 and PIN 7 of the control module connector (visual inspection for deformation).
Test Point 7
TEST POINT 7
Front Right Speed Sensor, Open Circuit / Short To Ground / Short To B+
DTC 4200
General procedure as for test point 6/diagnostic trouble code 4205.
- Speed sensor signal: Check with the Porsche System Tester 2 via the Actual values menu (call up front right wheel speed).
- Internal resistance/continuity between PIN 4 and PIN 5 on the control module connector.
Test Point 8
TEST POINT 8
Rear Right Speed Sensor, Open Circuit/ Short To Ground / Short To B+
DTC 4210
General procedure as for test point 6/diagnostic trouble code 4205.
- Speed sensor signal: Check with the Porsche System Tester 2 via the Actual values menu (call up rear right wheel speed).
- Internal resistance/continuity between PIN 1 and PIN 2 on the control module connector.
Test Point 9
TEST POINT 9
Rear Left Speed Sensor, Open Circuit / Short To Ground / Short To B+
DTC 4215
General procedure as for test point 6/diagnostic trouble code 4205.
- Speed sensor signal: Check with the Porsche System Tester 2 via the Actual values menu (call up rear left wheel speed).
- Internal resistance/continuity between PIN 8 and PIN 9 on the control module connector.
Test Point 10
TEST POINT 10
Control module Faulty
DTC 4226, 4231, 4236, 4241, 4246, 4251, 4256, 4261
Actual fault: ABS solenoid valve faulty.
The System Tester 2 can be used to check the function of the ABS solenoid valves via the Drive links menu, sub-menu maintain pressure and
Reduce pressure.
If the control module or ABS solenoid valves are damaged, the complete hydraulic unit with integrated control module must be replaced.
Important: Before replacing the hydraulic unit, check whether:
- ground is connected to control module connector PIN 16 (from ground point 2) and PIN 19 (from electronics ground). The locations of the