Thursday 27 June 2019

2020 Porsche Boxster S (986) F6-3.2L Technical Service Bulletin # 62/04 Date: 040526

2020 Porsche Boxster S (986) F6-3.2L Technical Service Bulletin # 62/04 Date: 040526



Body - Center Windstop Bracket Securing



Boxster



2/04 6847



Binder - 6, Body Equipment This bulletin replaces bulletin Group 6, # 11/97, dated 10-30-98.



Date: 5-25-04



Windstop Locking Lever



Vehicle Type:



2020 Porsche Boxster S (986) F6-3.2L Page 158



Boxster/Boxster S



Model Year:



As of '97 (V)



Concerns:



Attachment of windstop middle section on roll-over bar.



- Windstop noises when driving (rattling, clicking)



- New locking levers



- Parts for replacement requirements



Filing:



Remove Boxster technical information bulletin Group 6, 11/97, dated 10-30-98 from your Boxster Technical Manual and file this one. Affix the



attached decal across Technical Bulletin Book 0, page 105.



Information:



Since March 12, 2004 production, the locking levers (right and left) for the securing of the windstop middle section have been changed. The



locking levers are now available separately using normal parts ordering procedures.



In case of complaints, the two locking levers (right and left) are to be replaced and not the windstop middle section.



Lever Identification



Figure 1, Item A, shows the new version (right locking lever). The spring element of the new lever (arrow) is slimmer and more flexible compared



to the previous version (Item B).



Introduction:



Parts Information:



Work Procedure:



In order to install a new locking lever, the windstop middle section must be removed.



2020 Porsche Boxster S (986) F6-3.2L Page 159



1. Removing locking lever (Figure 2). Using a small slotted screwdriver, disengage the locking lever by pressing down the axle and pull the



lever out of the windstop frame.



2. Installing locking lever. Audibly engage the new locking lever in the windstop frame.



Note:



To prevent a reduction of pre-tension force in the engagement connection, the locking lever should not be repeatedly disengaged from



and engaged in the windstop frame.



Literature:



Boxster Technical Manual, Group 6:



> Repairs: 68 47 19 - Removing/installing windstop



Boxster M.Y. 04 Owner's Manual:



> Chapter "Mobile roofs" - Windstop