2010 Porsche Panamera Turbo (970) V8-4.8L Turbo A L L Diagnostic Trouble Codes ( DTC ): P Code Charts Page 468
- Transmission limp-home indication in instrument cluster
Interchange Detected
P0702
Diagnosis information - PDK
Interchange detected
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Control unit is installed in the wrong vehicle
Fault setting conditions
- VIN in the control unit does not match the VIN on the CAN
Fault effects
- Adaptation values of the transmission are invalid
Double Fault: Two Faults Demand Alternative Measures With Equal Priority Rating
P0702
Diagnosis information - PDK
Double fault: two faults demand alternative measures with equal priority rating
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Analyse fault cause for faults also entered
Fault setting conditions
- Inadmissible combination of alternative measures
Fault effects
- Emergency hold function
- Transmission limp-home indication in instrument cluster control unit
Input Shaft Overspeed
P0702
Diagnosis information - PDK
Input shaft overspeed
Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are
then tested and any faults are stored.
- Ignition on
Possible fault causes
- Speed sensors faulty
- Lines faulty
Fault setting conditions
- Rotational speed of shaft 1 or shaft 2 below threshold value
- Rotational speed of shaft 1 or shaft 2 above threshold value