sleeve -7.1- with sealing ring -7.3- the seal for the firewall -7.2- and the hose clamps (clamps) -6 and 6.1-.
- The two push rods -12 and 9- are to be replaced with the modified version -12.1 and 9.1-.
- Additional assembly - Boxster model '97: The brake pedal must be replaced in addition to the new push rod -9.1- in Boxster model year '97
--> "Additional assembly - Boxster model '97" in 47-6.1.
Difference in the push rods:
^ Push rods -12.1- with thread and fastening nut -13.1- in place of push rod -12- with retainer -13-.
^ A guide for the bellows -arrow- is present in the previous push rod -9-. A guide is not present and not permissible in the new push rod -9.1-!
Removal
1. Switch off ignition. Remove cover -A + B- and battery cover.
2. Remove spare wheel.
3. Remove brake booster -C- --> 47-6 Removing and installing brake booster".
Note!
^ The brake master cylinder -B- and the hydraulic unit -D- must be removed to remove and install the brake booster -C-.
^ The assembly of the brake master cylinder -B- with the brake booster -C- must not be disconnected for removal and installation if both parts
should be continued to be used!
4. Remove battery -1- (necessary to remove intermediate piece -11-). Remove alarm horn on the intermediate piece -11-.
5. Undo intermediate piece -11- -arrow- (2 M8 nuts and hexagon socket head bolt) and remove in the direction of the battery. Unclip
air-conditioning line -2- from the holder.