6. Remove the bellows -1- on the fire wall and the bellows -2- on the brake booster. Pull off the grommet (rubber groove ring) -3-.
Note!
The grommet -3- is not replaced!
7. Undo brake pushrod -9- on the brake pedal and remove.
Note!
The former brake pushrod -9- with guide (double rib) -arrow- is to be replaced with the brake pushrod -9.1- without guide!
Additional assembly - Boxster model '97
^ Brake pedal -14- must be replaced by -14.1- in addition to the new push rod -9.1- in Boxster model year '97. The figure shows 1 brake pedal
with old -14- and new -14.1- push rod connection.
Note!
^ Installation of the new brake pedal -14.1- is necessary as the connection to the push rod in model '97-9-is made with a pin (self-aligning
bolt) -16- with a mechanical locking device -15-. Connection as of '98 model: Threaded bolt -16.1- with threaded bushing -15.1-.
^ The new brake pedal -14.1- is fitted with a bearing (pressed in) (at the connection to the push rod) while the brake pedal of model '97 -14-
tin this area) is fitted with a bushing.
^ The clip -X- on the push rod of model '97 -9- is not included!
- Remove the brake pedal and install new brake pedal --> 46; Rep. Gr. 46 05 19; Remove and install brake pedal. Allocation/ part numbers
are to be referred to in the Technical Information notice, Gr. 4 number 6/01.